A40 A50 Tungsten Carbide Inserts Cutting tools ISO14001 2004
Specifications:
Type A
| Type | Dimensions (mm) |
| | L | t | S | r | a° |
| A5 | 5 | 3 | 2 | 2 | - |
| A6 | 6 | 4 | 2.5 | 2.5 | - |
| A8 | 8 | 5 | 3 | 3 | - |
| A10 | 10 | 6 | 4 | 4 | 18 |
| A12 | 12 | 8 | 5 | 5 | 18 |
| A16 | 16 | 10 | 6 | 6 | 18 |
| A20 | 20 | 12 | 7 | 7 | 18 |
| A25 | 25 | 14 | 8 | 8 | 18 |
| A32 | 32 | 18 | 10 | 10 | 18 |
| A40 | 40 | 22 | 12 | 12 | 18 |
| A50 | 50 | 25 | 14 | 14 | 18 |
Type B
| Type | Dimensions (mm) |
| | L | t | S | r | a° |
| B5 | 5 | 3 | 2 | 2 | - |
| B6 | 6 | 4 | 2.5 | 2.5 | - |
| B8 | 8 | 5 | 3 | 3 | - |
| B10 | 10 | 6 | 4 | 4 | 18 |
| B12 | 12 | 8 | 5 | 5 | 18 |
| B16 | 16 | 10 | 6 | 6 | 18 |
| B20 | 20 | 12 | 7 | 7 | 18 |
| B25 | 25 | 14 | 8 | 8 | 18 |
| B32 | 32 | 18 | 10 | 10 | 18 |
| B40 | 40 | 22 | 12 | 12 | 18 |
Type C
| Type | Dimensions (mm) |
| | L | t | S | a° |
| C5 | 5 | 3 | 2 | - |
| C6 | 6 | 4 | 2.5 | - |
| C8 | 8 | 5 | 3 | - |
| C10 | 10 | 6 | 4 | 18 |
| C12 | 12 | 8 | 5 | 18 |
| C16 | 16 | 10 | 6 | 18 |
| C20 | 20 | 12 | 7 | 18 |
| C25 | 25 | 14 | 8 | 18 |
| C32 | 32 | 18 | 10 | 18 |
| C40 | 40 | 22 | 12 | 18 |
| C50 | 50 | 25 | 14 | 18 |
Type D
| Type | Dimensions (mm) |
| | L | t | S |
| D3 | 3.5 | 8 | 3 |
| D4 | 4.5 | 10 | 4 |
| D5 | 5.5 | 12 | 5 |
| D6 | 6.5 | 14 | 6 |
| D8 | 8.5 | 16 | 8 |
| D10 | 10.5 | 18 | 10 |
| D12 | 12.5 | 20 | 12 |
Type E
| Type | Dimensions (mm) |
| | L | t | S | a° |
| E4 | 4 | 10 | 2.5 | - |
| E5 | 5 | 12 | 3 | - |
| E6 | 6 | 14 | 3.5 | - |
| E8 | 8 | 16 | 4 | 9 |
| E10 | 10 | 18 | 5 | 9 |
| E12 | 12 | 20 | 6 | 9 |
| E16 | 16 | 22 | 7 | 9 |
| E20 | 20 | 25 | 8 | 9 |
| E25 | 25 | 28 | 9 | 9 |
| E32 | 32 | 32 | 10 | 9 |
Description:
1,Used for steel, stainless steel, cast steel and cast iron cutting and processing.
2, Good toughness
3 ,Superior wear resistance & high strength
4 ,A comprehensive range of types with molds
5 ,Short deliver period,with some types always in stock
6,Full-automatic press machine,which brings stable quality and high efficiency
Applications:
| Grade | ISO Code | Density | Hardness | T.R.S | Applications recommended |
| g/cm3 | HRA | MPa |
| YM3 | K05 | 15.1 | 92 | 1400 | Suitable for finishing of cast iron and nonferrous metal. |
| YM6X | K10 | 14.95 | 91.5 | 1800 | The finishing & semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel. |
| YM6 | K15 | 14.95 | 90.5 | 1900 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| YM8 | K20 | 14.8 | 89.5 | 2200 |
| YW1 | M10 | 13.1 | 91.6 | 1600 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel. |
| YW2 | M20 | 13 | 90.6 | 1800 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs. |
| YT15 | P10 | 11.4 | 91.5 | 1600 | Suitable for the finishing and semi-finishing for steel and cast steel with a moderate feed rate and rather high cutting speed. |
| YT14 | P20 | 11.6 | 90.8 | 1700 | Suitable for the finishing and semi-finishing of steel and cast steel. |
| YT5 | P30 | 12.9 | 90.5 | 2200 | Suitable for the heavy duty rough turning of and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
Competitive Advantage:
1. Focusing on manufacturing tungsten carbide products over 13 years.
2. Specialist manufacturer equipped with advanced processing machines and over160 technicians
3. Over 50 tons/month productivity to assure sustainable supply of products
4. Owing mould workshop to design & produce moulds for nonstandard products, and with mould stocks over 10 thousand sets for different products.
5. Full ability to accept OEM & ODM orders
6. Stringent quality control and quality consistency.
7. Professional mechanical & chemical inspecting labs to control the quality of raw material and
inspect physical & mechanical properties of finished products.
Product Tags:
|
|
A40 A50 Tungsten Brazing Carbide Tips Images
|
